MIL-S-23190/2 (NOTICE 2), MILITARY SPECIFICATION: STRAPS, CLAMPS, PLASTIC AND METAL, AND MOUNTING HARDWARE, PLASTIC FOR CABLE HARNESS TYING AND SUPPORT CLAMP, LOOP, METAL, CUSHIONED, ADJUSTABLE, WIRE SUPPORT, TYPE V, CLASS 1 (03 JUN 2004) [S/S BY SAE-AS23190/2]., MIL-S-23190/2, dated 28 March 1986, is hereby canceled. Future acquisition for this item should refer to SAE-AS23190/2, 揝traps, Clamps, Plastic and Metal, and Mounting Hardware, Plastic for Cable Harness Tying and Support Clamp, Loop, Metal, Cushioned, Adjustable, Wire Support, Type V, Class 1.擟AUTION: The supersession information is valid as of the date of this notice and may be superseded by subsequent revisions of the superseding document.(Application for copies of SAE - Aerospace Standards should be addressed to SAE, 400 Commonwealth Drive, Warrendale, PA 15096-0001.)
基本信息
标准名称: | PN2500超高压阀门和管件 第4部分:带颈接头 |
英文名称: | PN 2500 ultrahigh pressure valves and fittings —Part 4:Necked joints |
中标分类: |
机械 >>
通用零部件 >>
阀门 |
ICS分类: |
流体系统和通用件 >>
阀门 >>
阀门综合
|
替代情况: | 替代JB/T 1308.4-1999 |
发布部门: | 中华人民共和国工业和信息化部 |
发布日期: | 2011-05-18 |
实施日期: | 2011-08-01 |
首发日期: | |
作废日期: | |
归口单位: | 全国阀门标委会 |
起草单位: | 合肥通用机械研究院、兰州高压阀门有限公司、大连大高阀门有限公司 |
出版社: | 机械工业出版社 |
出版日期: | 2011-08-01 |
适用范围
本标准规定了超高压阀门用带颈接头形式、尺寸和技术要求。
本标准适用于公称压力PN2500、公称尺寸为DN3~DN25的乙烯、聚乙烯等非腐蚀性介质的锻造钢制阀门的带颈接头。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 机械 通用零部件 阀门 流体系统和通用件 阀门 阀门综合
【英文标准名称】:Methodsoftestforcoffeeandcoffeeproducts-Greencoffee:sizeanalysisbymanualsieving
【原文标准名称】:咖啡与咖啡制品试验方法.第5部分:生咖啡手工筛分粒度分析
【标准号】:BS5752-5-1991
【标准状态】:作废
【国别】:英国
【发布日期】:1991-10-31
【实施或试行日期】:1991-10-31
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:试验条件;食品检验;食品;直径;咖啡;孔眼;试验设备;咖啡豆;孔;筛选(大小);粒度测量;绿色;筛分设备
【英文主题词】:Coffee;Foodinspection;Foodproducts;Particlesizemeasurement;Screening;Screening(sizing);Size;Testing;Tests
【摘要】:Sievingandweighingoffractionsfollowedbyrecombinationforvalidatingresults.Moisturecontentdeterminationforoneofthethreerecombinedtestportions.
【中国标准分类号】:X50;B35
【国际标准分类号】:67_140_20
【页数】:12P.;A4
【正文语种】:英语